Nanoskin NANO CUT Finishing Compound - 1 Gallon

Nanoskin NANO CUT Finishing Compound is designed to follow Nanoskin SPEED CUT Cutting Compound and all other Nanoskin compounds to remove light swirls and restore optimum gloss. NANO CUT will give your smooth, flawless results when applied by hand or with an dual action orbital polisher. Its micro ceramic nano abrasives allow the polish to cut fast and leave a smooth finish in fewer passes. Ceramic nano abrasives do not break down like diminishing abrasives, which gives NANO CUT a long working time. Nanoskin NANO CUT permanently removes swirls and light imperfections, leaving a smooth, reflective finish. NANO CUT is VOC compliant and body shop safe.
Always use a wa x or pai nt sea lant after polishing.

Directions:
For best results, use on clean, cool pai nt and out of direct sunlight.
Clean pad frequently using pad conditioner brush or compressed air using regulatory approved air nozzle.
Suggested Tools for Optimum Results-
FLEX XC 3401 VRG Dual Action Orbital Polisher
RUPES LHR 15ES Big Foot Random Orbital Polisher
RUPES LHR 21ES Big Foot Random Orbital Polisher
Removing 1,500 ~ 2,500 Grit Wet Sanding Marks-
1. Apply Nanoskin SPEED CUT Cutting Compound uniformly to
MICROBUFF Cutting Pad.
2. Buff at 4800 opm, working a 2 ' x 2 ' section.
3. Wipe residue off using a soft, clean microfiber towel.
4. Make your own choice for finishing:
A. Apply Nanoskin FORMULA 67 Professional Quick Detailer
with MICROBUFF Polishing Pad to add a layer of wa x and
restore showroom gloss. (Speed 3800 opm)
B. Apply Nanoskin SEAL NANO Perfect Sea lant with
MICROBUFF Finishing Pad to remove gloss-hindering defects
while leaving a durable layer of pai nt protection behind.
(Speed 3800 opm)
Removing 2,500 ~ 3,000 Grit Wet Sanding Marks or Finer scratches-
1. Apply Nanoskin NANO CUT Finishing Compound uniformly to
MICROBUFF Cutting Pad.
2. Buff at 4800 opm, working a 2 ' x 2 ' section.
3. Wipe residue off using a soft, clean microfiber towel.
4. Make your own choice for finishing:
A. Apply Nanoskin FORMULA 67 Professional Quick Detailer
with MICROBUFF Polishing Pad to add a layer of wa x and
restore showroom gloss. (Speed 3800 opm)
B. Apply Nanoskin SEAL NANO Perfect Sea lant with
MICROBUFF Finishing Pad to remove gloss-hindering defects
while leaving a durable layer of pai nt protection behind.
(Speed 3800 opm)

NOTE:
PAD REJUVENATION
The heavy and quick cutting of some polishers can cause the surface to become very hot and cause the o ils in the polishes/compounds to prematurely flash off.
One fine mi st of Nanoskin PAD REJUVENATOR to the center of the used pad is enough lubrication to reactivate the polishes/compounds left on the pad and get it back to a serviceable condition.
DO NOT APPLY MORE POLISHES/COMPOUNDS TO THE PAD until all excess compound is removed off the pad and the pad is completely lub ricated then apply a quarter size (1" diameter or 2.5 cm.) amount of product to center of pad.
More compound IS NOT the answer. After spr aying PAD REJUVENATOR on the pad, you will find you will be able to finish a section without any additional compounds. There was a commercial many years ago saying, "A little dab will do you" and that 's the way this system works.